|
|
|
|
$925.00 Complete Ready to Use
|
How it works |
Two 50lb CO2 cylinders are connected to the two 24" stainless steel braided pigtails. Your supply line to the incubator is connected to the upper line pressure regulator (hose barb is supplied). One cylinder is used as the primary tank, the other cylinder is the reserve tank. When the primary tank is empty, the manifold automatically switches to the secondary tank assuring an uninterrupted flow of CO2 to your incubator. When you replace the empty tank, move the handle to the other side and the process begins again using the secondary tank as the primary tank. You can change the empty tank without interrupting the flow of CO2. |
|
How do I know when a tank is empty? |
The pressure gauges will indicate what tank is in use and what tank is empty. If the gauge reads ~160 psi, the tank is empty and the other tank is in use. |
|
Can I run out of CO2? |
Yes, but only if you allow both tanks to empty or fail to move the primary tank lever to the proper tank and the secondary tank empties. |
| What is the delivery pressure? | You can set the delivery pressure from 0 to 30 psi. Most incubators require 10-20 psi inlet pressure. |
| How do I mount it to the wall? | Mount the bracket to a solid structure like a cabinet or wall stud. The bracket has 4 holes for mounting to the wall. Custom bench stands can be ordered for free standing applications. |
| How are the cylinders connected? | Two 24" pigtails (Hoses) with CGA320 connections are supplied. Each cylinder must be held with wall or bench clamps. The manifold will not act as a cylinder clamp. You can order wall clamps from labregulator as well (Bench clamps) |
| Materials of Construction | Chrome plated brass regulators - Stainless Steel wall bracket - Stainless steel inner liner with stainless steel braided outer cover pigtails - CGA 320 fittings with plastic washers |
| Warranty | 1 year - Manufactured by Harris Calorific |
| Inlet pressures | Up to 3000 psi (CO2 is usually ~850 psi at room temperature) |
| Outlet pressures | 0 to 30 psi |
| Switching pressure | 180 psi right to left - 160 psi left to right |
| Diagram material | Stainless steel |
| Outlet fitting | 1/4 NPT (female) or use supplied brass hose barb fitting |
| Mounting hardware | Not included - must use fasteners capable of supporting 50 lbs |